JEE Main · Physics → Steady

Current Electricity appeared 50 times across 3 years — 5.8% of Physics. This question is from Galvanometer/Ammeter with Shunt Resistance.

Year	2026	2025	2024	Total
Questions	18	13	19	50

Practice all Current Electricity questions → View full JEE Main weightage & trends →

In the figure shown below, a resistance of $150.4Ω$ $150.4\Omega$ is connected in series to an ammeter A of resistance $240Ω$ $240\Omega$. A shunt resistance of $10Ω$ $10\Omega$ is connected in parallel with the ammeter. The reading of the ammeter is ________ $mA$ $\mathrm{mA}$.
A circuit schematic containing a 20V battery connected in series with a 150.4 ohm resistor and a parallel combination of a 240 ohm ammeter and a 10 ohm shunt resistor.

Numerical Answer Type:

Enter a numerical value Answer: 5 to 5 +4 marks

Solution & Explanation

Related Formula

Parallel combination of ammeter ( $RG = 240Ω$ $R_G = 240\Omega$) and shunt ( $S = 10Ω$ $S = 10\Omega$):

Rparallel = (RG \cdot S)/(RG + S)

Total equivalent resistance:

Req = Rₛₑᵣᵢₑₛ + Rparallel

Current Divider Rule:

Iammeter = Itotal \cdot ((S)/(RG + S))

Core Logic

Let's first calculate the equivalent resistance of the parallel branch (ammeter + shunt):

Rparallel = (240 \times 10)/(240 + 10) = (2400)/(250) = 9.6Ω

Now, add the series resistance ( $150.4Ω$ $150.4\Omega$) to find the total equivalent resistance of the circuit:

Req = 150.4 + 9.6 = 160Ω

Step 1: Finding Total Current

Use Ohm's Law to calculate the total current $Itotal$ $I_{\text{total}}$ drawn from the $20~V$ $20\mathrm{~V}$ battery:

Itotal = VReq = (20)/(160) = 0.125~A

Step 2: Calculating Ammeter Current

Using the Current Divider Rule, calculate the current $Iammeter$ $I_{\text{ammeter}}$ flowing through the $240Ω$ $240\Omega$ ammeter branch:

Iammeter = Itotal \times (10)/(240 + 10) = 0.125 \times (10)/(250)

Iammeter = 0.125 \times (1)/(25) = 0.005~A

Convert this into milliamperes ( $mA$ $\mathrm{mA}$):

Iammeter = 0.005 \times 1000 = 5~mA

Therefore, the reading of the ammeter is $5~mA$ $5\mathrm{~mA}$.

Simplified equivalent circuit showing ammeter shunt current split for Q25 — A circuit schematic containing a 20V battery connected in series with a 150.4 ohm resistor and a parallel combination of a 240 ohm ammeter and a 10 ohm shunt resistor.

Simplified equivalent circuit showing ammeter shunt current split for Q25 — A circuit schematic containing a 20V battery connected in series with a 150.4 ohm resistor and a parallel combination of a 240 ohm ammeter and a 10 ohm shunt resistor.

Pattern Recognition

Notice how nicely the numbers are set up in JEE Mains questions! The parallel combination of $240Ω$ $240\Omega$ and $10Ω$ $10\Omega$ yields exactly $9.6Ω$ $9.6\Omega$, which beautifully combines with $150.4Ω$ $150.4\Omega$ to form a perfect integer sum of $160Ω$ $160\Omega$. This tells you that your intermediate steps are absolutely correct!

Chapter Mix

Class 12 Physics: Current Electricity: Measuring Devices

Reference Study Guides

Current Electricity

More Current Electricity Previous-Year Questions

Q jee_main_2026_21_jan_morning Heating Effect of Current

The heat generated in 1 minute between points A and B in the given circuit, when a battery of 9V with internal resistance of

1 Ω

is connected across these points is ____ J.

Heating Effect of Current diagram for Q47 - JEE Main 2026 Morning — A bridge network with resistors 1 ohm, 2 ohms, 2 ohms, and 4 ohms forming the arms.

Numerical Answer. Answer: 1080 to 1080

Solution

Related Formula

Req = (R₁ R₂)/(R₁ + R₂) (parallel)

$H = I² R t$ $H = I^2 R t$

I = VReq + r

Core Logic

The circuit is a balanced Wheatstone bridge between A and B, because the ratio of adjacent arms is $(1)/(2) = (2)/(4)$ $\frac{1}{2} = \frac{2}{4}$. Thus, the middle $1 Ω$ $1\,\Omega$ resistor (if there is one connecting the middle nodes) is ineffective.

Heating Effect of Current solution diagram for Q47 - JEE Main 2026 Morning — A bridge network with resistors 1 ohm, 2 ohms, 2 ohms, and 4 ohms forming the arms.

The equivalent resistance across AB ( $RAB$ $R_{AB}$) involves the upper branch ( $1+2 = 3 Ω$ $1+2 = 3\,\Omega$) and the lower branch ( $2+4 = 6 Ω$ $2+4 = 6\,\Omega$) in parallel.

Heating Effect of Current solution diagram for Q47 - JEE Main 2026 Morning — A bridge network with resistors 1 ohm, 2 ohms, 2 ohms, and 4 ohms forming the arms.

RAB = (3 \times 6)/(3 + 6) = (18)/(9) = 2 Ω

Step 1: Calculate Current and Heat

Total resistance in the circuit = $RAB + rinternal = 2 + 1 = 3 Ω$ . Total current from the battery $i = 9V3 Ω = 3A$ .

The heat generated specifically between points A and B in 1 minute (60 seconds) is:

HAB = i² RAB t = (3)² \times 2 \times 60

HAB = 9 \times 120 = 1080 J

Pattern Recognition

Check for balanced Wheatstone bridge first. Then use $H = i² R t$ $H = i^2 R t$ strictly with the equivalent resistance of just the section $AB$ $AB$ to find heat specifically generated across $AB$ $AB$.

Chapter Mix

Class 12 Physics: Current Electricity

Q28 jee_main_2026_21_jan_evening Potentiometer

The total length of potentiometer wire AB is

50 cm

in the arrangement as shown in figure. If P is the point where the galvanometer shows zero reading then the length AP is ________ cm.

Potentiometer diagram for Q28 - JEE Main 2026 Evening — Potentiometer circuit with a 50 cm wire AB, a galvanometer, and standard bridge resistors of 6 ohms and 4 ohms.

A. $15$ $15$
B. $30$ $30$
C. $25$ $25$
D. $20$ $20$

Solution

Related Formula

For a balanced Wheatstone bridge configuration:

(R₁)/(R₂) = (l₁)/(l₂)

Core Logic

When the galvanometer shows zero reading, it implies that the bridge is balanced. The resistance of the wire segments is proportional to their lengths.

Let the length of segment AP be $lAP$ $l_{AP}$ and PB be $lPB$ $l_{PB}$.

6 ΩRAP = 4 ΩRPB

Since $R \propto l$ $R \propto l$:

RAPRPB = lAPlPB = (6)/(4) = (3)/(2)

Step 1: Applying Total Length Constraint

We are given the total length:

lAP + lPB = 50 cm

Using the ratio $lAP = (3)/(2) lPB$ $l_{AP} = \frac{3}{2} l_{PB}$:

(3)/(2)lPB + lPB = 50

(5)/(2)lPB = 50 lPB = 20 cm

Step 2: Final Conclusion

Solving for $lAP$ $l_{AP}$:

lAP = 50 - 20 = 30 cm

Alternatively, $lAP = (3)/(3+2) \times 50 = (3)/(5) \times 50 = 30 cm$ .

Pattern Recognition

Null deflection over a uniform wire directly translates resistance ratios into length ratios. Standard Wheatstone bridge application wrapped in potentiometer geometry.

Chapter Mix

Class 12 Physics: Current Electricity

Q35 jee_main_2026_21_jan_evening Maximum Power Transfer Theorem

A battery with EMF E and internal resistance r is connected across a resistance R. The power consumption in R will be maximum when :

A. $R=2r$ $R=2r$
B. $R=(r)/(2)$ $R=\frac{r}{2}$
C. $R=\sqrt(2)r$ $R=\sqrt{2}r$
D. $R=r$ $R=r$

Solution

Related Formula

P = I² R = ((E)/(R+r))² R

Core Logic

To maximize power across the load resistance $R$ $R$, we apply the Maximum Power Transfer Theorem. The power transferred to the load is maximum when the load resistance equals the internal resistance of the battery.

Setting $(dP)/(dR) = 0$ $\frac{dP}{dR} = 0$ yields: $R = r$ $R = r$

Step 1: Final Conclusion

Power is maximum when the external resistance is strictly equal to the internal resistance ( $R=r$ $R=r$).

Pattern Recognition

Direct theoretical application of the Maximum Power Transfer Theorem.

Chapter Mix

Class 12 Physics: Current Electricity

Q40 jee_main_2026_21_jan_evening Combination of Resistors

Two known resistance of

R Ω

and

2R Ω

and one unknown resistance

X Ω

are connected in a circuit as shown in the figure. If the equivalent resistance between points A and B in the circuit is

X Ω

, then the value of X is ________

Ω

.

Circuit diagram of resistors for Q40 - JEE Main 2026 Evening — Bridge-like resistor circuit containing unknown resistance X and known resistances R and 2R.

A. $(\sqrt(3)-1)R$ $(\sqrt{3}-1)R$
B. $R$ $R$
C. $2(\sqrt(3)-1)R$ $2(\sqrt{3}-1)R$
D. $(\sqrt(3)+1)R$ $(\sqrt{3}+1)R$

Solution

Related Formula

For parallel combination: $Req = (R₁ R₂)/(R₁ + R₂)$ For series combination: $Req = R₁ + R₂$ $R_{\text{eq}} = R_1 + R_2$

Core Logic

Based on the circuit topology, the $2R$ $2R$ and $X$ $X$ resistors are in series. This combination is in parallel with the $R$ $R$ resistor. The total equivalent resistance across A and B is given as $X$ $X$.

Req = ((2R + X) \cdot (R))/((2R + X) + R)

Step 1: Setting up the Quadratic

Set the equivalent resistance equal to $X$ $X$:

X = ((2R + X)R)/(3R + X)

Cross-multiplying yields:

X(3R + X) = 2R² + XR

3RX + X² = 2R² + XR

X² + 2RX - 2R² = 0

Step 2: Solving for X

Using the quadratic formula to solve for $X$ $X$:

X = -2R \pm \sqrt((2R)² - 4(1)(-2R²))2

X = -2R \pm \sqrt(4R² + 8R²)2 = -2R \pm \sqrt(12R²)2

X = -2R \pm 2R\sqrt(3)2 = -R \pm R\sqrt(3)

Since resistance must be positive:

X = (\sqrt(3) - 1)R

Pattern Recognition

Self-referential equivalent resistance problems always collapse into a quadratic equation $x² + ax + b = 0$ $x^2 + ax + b = 0$. Solve strictly for the positive root.

Chapter Mix

Class 12 Physics: Current Electricity

Q31 jee_main_2026_22_january_morning Meter Bridge

A meter bridge with two resistances

R₁

and

R₂

as shown in figure was balanced (null point) at 40 cm from the point P. The null point changed to 50 cm from the point P, when

16~Ω

resistance is connected in parallel to

R₂

. The values of resistances

R₁

and

R₂

are \_\_\_\_.

Current Electricity diagram for Q31 - JEE Main 2026 January Morning — Meter bridge circuit with resistances R1 and R2 and balancing lengths.

A. $R₂ = 16Ω, R₁ = (16)/(3)Ω$
B. $R₂ = 4Ω, R₁ = (4)/(3)Ω$
C. $R₂ = 8Ω, R₁ = (16)/(3)Ω$
D. $R₂ = 12Ω, R₁ = (12)/(3)Ω$

Solution

Related Formula

(R₁)/(R₂) = (l₁)/(100 - l₁)

Core Logic

Solution diagram for Q31 - JEE Main 2026 Morning — Meter bridge circuit with resistances R1 and R2 and balancing lengths.

Initially:

$(R₁)/(R₂) = (40)/(60) = (2)/(3) R₁ = (2)/(3)R₂$ ---- (1)

After connecting $16~Ω$ $16~\Omega$ in parallel with $R₂$ $R_2$:

$(R₁)/(((R₂ \times 16)/(R₂ + 16))) = (50)/(50) R₁ = (16 R₂)/(16 + R₂)$ ---- (2)

Solving equations (1) and (2) yields:

R₂ = 8~Ω, R₁ = (16)/(3)~Ω

Pattern Recognition

Sees: Meter bridge balancing with parallel shunt resistance. Shortcut: Set up length ratios for initial and modified states and solve linear simultaneous equations. Check: Matches option (3). ✓

Chapter Mix

Class 12 Physics: Current Electricity

More Current Electricity Questions — jee_main_2025_03_april_morning

Practice all Current Electricity previous-year questions →

SYSTEM

Syllabus Analysis & Trend Mapping

Dashboard Chapter Trends Formula Recognition Questions Feed Weightage

Rankbit System

JEE Physics: Waves (+15.5%) | Electrostatics: Concentric Shells (-29.7%) | Modern Physics: Photoelectric Clones (+34.2%) | Mathematics: Definite Integrals (+18.1%) | Chemistry: Coordination Splitting (-11.4%) | JEE Physics: Waves (+15.5%) | Electrostatics: Concentric Shells (-29.7%) | Modern Physics: Photoelectric Clones (+34.2%) | Mathematics: Definite Integrals (+18.1%) | Chemistry: Coordination Splitting (-11.4%)